Volquartsen Volthane LEFT HAND Mark 2 grips on Mark 3

Discuss .22 pistols.

Moderators: Bullseye, Moderators

Post Reply
stewswanson
New member
New member
Posts: 30
Joined: Wed Dec 09, 2009 9:37 pm
Location: Harrisburg,Pennsylvania

Volquartsen Volthane LEFT HAND Mark 2 grips on Mark 3

Post by stewswanson » Wed Nov 17, 2010 5:36 pm

If you are a LH person like me (in my right mind) and like the Volthane grips for your Mark 3 you are out of luck. They only make them in RH for the Mark 3. However if you don't mind a little mod. you can use the LH Mark 2 Volthanes as everything is the same other than the Mag.Release.[img]
I used a spent case Inserted into a hole(7/32") made 11/16" from the forward point of the grip (on the LH side) on a line toward the top screw.
The grip must be recessed to clear the Mag.Release button and retainer screw and on the RH side make a recess for the extension of the button's shaft. E-mail [email protected] for a photo if you wish one.
Stew

Post Reply