MK 1 Issues

Discuss .22 pistols.

Moderators: Bullseye, Moderators

Post Reply
chefmossy
New member
New member
Posts: 45
Joined: Mon Sep 22, 2008 10:00 pm
Location: St Ann Mo

MK 1 Issues

Post by chefmossy » Thu Nov 29, 2012 6:22 pm

MK 1 will fire first two rounds then nothing manually work the action and it will fire next round.

greener

Post by greener » Thu Nov 29, 2012 6:47 pm

Not loading round 3 or not firing it?

User avatar
blue68f100
Master contributor
Master contributor
Posts: 1997
Joined: Mon May 25, 2009 10:31 pm
Location: Piney Woods of East Texas

Post by blue68f100 » Thu Nov 29, 2012 6:48 pm

If you have not detail clean the gun start there.

These are the most common problems:

I'm assuming it's loading a round but the trigger is not resetting. The reset can be caused from a couple of things. The disconnector can be sticking. This is controlled by the spring under the trigger plunger. Or it's actually dirty and sticking to the side of the frame. If you have a trigger that has adj screws, the post travel may have moved, back off 1/2 turn.
David

SS MKIII 6 7/8" Fluted Hunter. Mueller Quick Shot, Bushnell 2x Scope, Hogue Rubber Grips
Custom Built 1911

chefmossy
New member
New member
Posts: 45
Joined: Mon Sep 22, 2008 10:00 pm
Location: St Ann Mo

Post by chefmossy » Thu Nov 29, 2012 9:32 pm

it loads the third round but will not fire it. I will try cleaning it and see if that helps

greener

Post by greener » Thu Nov 29, 2012 10:09 pm

Thoroughly clean the bolt also. I've gotten failures to fire when the bolt face is crudded up.

Post Reply