Been spending most my time since I found this forum over on the rimfire forum. But I got to thinking this afternoon that I know virtually nothing about a S&W Model 19-3 that I have had for 12 - 15 years (?). Quite a while anyway. It is a .357 and really shoots nice. .38s are a couple inches lower at 40-50 yards, but surprisingly I can generally keep them or .357s in the black. Had a target of Osama Bin whatshisface with several holes about his head a few years ago.
It had rosewood grips on it when I got it, which I put away so I wouldn't knick them and put a Pachmeyer grip on it.
All info greatly appreciated.
S&W model 19-3
Moderators: Bullseye, Moderators
- Tigerbeetle
- Regular contributor
- Posts: 180
- Joined: Mon Mar 03, 2008 3:07 pm
- Location: Lilburn, GA
S&W model 19-3
Work is for people who don't hunt, plink or fish. Now that I am retired, I hunt, plink and fish. Life is good.
Tigerbeetle
Tigerbeetle
-
- New member
- Posts: 13
- Joined: Sat Aug 04, 2007 1:51 pm
- Location: NW ORYGUN
- Contact:
- Tigerbeetle
- Regular contributor
- Posts: 180
- Joined: Mon Mar 03, 2008 3:07 pm
- Location: Lilburn, GA
strength of fame
Thanks for the opinion, Madcratebuilder. Now I know it is a K frame. At some point in time, I heard that it was either an N frame or a K frame that should not be used for +P loads because the frame was strong enough. Can you help out on that question?
Thanks, tb
By the way, what is P&R'd??
Thanks, tb
By the way, what is P&R'd??
Work is for people who don't hunt, plink or fish. Now that I am retired, I hunt, plink and fish. Life is good.
Tigerbeetle
Tigerbeetle
-
- New member
- Posts: 13
- Joined: Sat Aug 04, 2007 1:51 pm
- Location: NW ORYGUN
- Contact:
Re: strength of fame
The K frame is considered a medium frame. I have read that folks have had forcing cone issues on the M19 when shooting 125gr bullets. Shooting 158gr .357 factory loads, or equal hand loads, should not be a problem. If you think your going to shoot a lot, look at the M27, that's an N (large) frame in .357mag. P&R means pinned and recessed. The barrel is pinned to the frame and the cylinder is recessed for the rim of the case. I have a M19 and a M27, both shoot well, with the M27 having less recoil (heavier)Tigerbeetle wrote:Thanks for the opinion, Madcratebuilder. Now I know it is a K frame. At some point in time, I heard that it was either an N frame or a K frame that should not be used for +P loads because the frame was strong enough. Can you help out on that question?
Thanks, tb
By the way, what is P&R'd??
- Tigerbeetle
- Regular contributor
- Posts: 180
- Joined: Mon Mar 03, 2008 3:07 pm
- Location: Lilburn, GA
Thanks,...Again!
I probably won't shoot the M-19 all that much. If I do get into it more, I will probably load 38s for a little more economical, less recoil shooting. I usually only carry it when I am deer hunting with heavy loads made to meet the state DNR F&G requirements. You never know when a big buck may walk right under your stand, or catch you with your rifle down.
I was sorting and cleaning gear last weekend and found the RCBS dies for the .357 that I got when I bought the gun. I'll have to ask my buddy if he ever used the dies and if they are already set up for the model N. I have a pacific press so I may have to get a new press, but it might be fun to load some shootable loads. I have saved most of my .357 brass over the years and probably have a couple hundred rounds or so. Maybe enough to get started in a small way. Have you any recommended loads you have used? I load for shotgun, 12 & 20 ga., and my .270, but have never loaded handgun.
Again, thanks for the info. TB
I was sorting and cleaning gear last weekend and found the RCBS dies for the .357 that I got when I bought the gun. I'll have to ask my buddy if he ever used the dies and if they are already set up for the model N. I have a pacific press so I may have to get a new press, but it might be fun to load some shootable loads. I have saved most of my .357 brass over the years and probably have a couple hundred rounds or so. Maybe enough to get started in a small way. Have you any recommended loads you have used? I load for shotgun, 12 & 20 ga., and my .270, but have never loaded handgun.
Again, thanks for the info. TB
Work is for people who don't hunt, plink or fish. Now that I am retired, I hunt, plink and fish. Life is good.
Tigerbeetle
Tigerbeetle