project......

The place to discuss all aspects of shotgun shooting.

Moderators: Bullseye, Moderators

User avatar
bgreenea3
Master contributor
Master contributor
Posts: 1587
Joined: Sun Sep 06, 2009 9:35 pm
Location: SW Michigan

project......

Post by bgreenea3 » Thu Feb 20, 2014 8:09 pm

Project ...... Image



Left over parts are ok, right?
"Courage is being scared to death... and saddling up anyway."

-John Wayne

User avatar
bearandoldman
Ye Loquacious Olde Pharte
Ye Loquacious Olde Pharte
Posts: 4194
Joined: Tue Aug 16, 2005 10:30 am
Location: Mid Michigan

Post by bearandoldman » Thu Feb 20, 2014 8:58 pm

as long as it works
You have great day and shoot straight and may the Good Lord smile on you.
Image

User avatar
bgreenea3
Master contributor
Master contributor
Posts: 1587
Joined: Sun Sep 06, 2009 9:35 pm
Location: SW Michigan

Post by bgreenea3 » Thu Feb 20, 2014 9:23 pm

Not sure how it happened but the receiver was full if cattail seeds. .. all fluffy. Of all things it is a 16 ga. .......


I would rather leave the patina on it but the owner took a wire wheel to the barrel about 15 years ago so it's going to get a nice blued finish all over.....or at least I'm going to try.
"Courage is being scared to death... and saddling up anyway."

-John Wayne

User avatar
blue68f100
Master contributor
Master contributor
Posts: 1997
Joined: Mon May 25, 2009 10:31 pm
Location: Piney Woods of East Texas

Post by blue68f100 » Thu Feb 20, 2014 10:06 pm

Left over parts are ok, right?
As long as they are to the same make and model....... :wink:
David

SS MKIII 6 7/8" Fluted Hunter. Mueller Quick Shot, Bushnell 2x Scope, Hogue Rubber Grips
Custom Built 1911

User avatar
bgreenea3
Master contributor
Master contributor
Posts: 1587
Joined: Sun Sep 06, 2009 9:35 pm
Location: SW Michigan

Post by bgreenea3 » Fri Feb 21, 2014 3:17 am

blue68f100 wrote:
Left over parts are ok, right?
As long as they are to the same make and model....... :wink:
Ummm. Maaaaybeee.
"Courage is being scared to death... and saddling up anyway."

-John Wayne

User avatar
bgreenea3
Master contributor
Master contributor
Posts: 1587
Joined: Sun Sep 06, 2009 9:35 pm
Location: SW Michigan

Post by bgreenea3 » Fri Feb 21, 2014 3:19 am

Progress Image
Image Image
Image
"Courage is being scared to death... and saddling up anyway."

-John Wayne

User avatar
bgreenea3
Master contributor
Master contributor
Posts: 1587
Joined: Sun Sep 06, 2009 9:35 pm
Location: SW Michigan

progress....

Post by bgreenea3 » Tue Feb 25, 2014 12:25 pm

Image

They really used nice lumber back in the day even on the economy type shotguns like the iver johnson champion and the Harrington and richardson I'm working on.....

Only a few more coats to go.....
"Courage is being scared to death... and saddling up anyway."

-John Wayne

User avatar
Bullseye
Site Admin/Host
Site Admin/Host
Posts: 6382
Joined: Sun Aug 14, 2005 12:23 pm
Location: USA

Post by Bullseye » Tue Feb 25, 2014 5:38 pm

That old single shot is starting to look pretty good.

R,
Bullseye
Image

User avatar
bigfatdave
Master contributor
Master contributor
Posts: 705
Joined: Sat Aug 02, 2008 7:22 am
Location: near Camp Perry

Post by bigfatdave » Tue Feb 25, 2014 6:57 pm

Looks like a successful salvage in progress there.

User avatar
bgreenea3
Master contributor
Master contributor
Posts: 1587
Joined: Sun Sep 06, 2009 9:35 pm
Location: SW Michigan

Post by bgreenea3 » Tue Feb 25, 2014 9:56 pm

Thanks... I'm working on two. The old H & R 16 gage and an iver johnson 12...

Both of them had bad firing pin return springs. So along with making them purty they will be mu h more safe.
"Courage is being scared to death... and saddling up anyway."

-John Wayne

User avatar
bgreenea3
Master contributor
Master contributor
Posts: 1587
Joined: Sun Sep 06, 2009 9:35 pm
Location: SW Michigan

Post by bgreenea3 » Wed Feb 26, 2014 9:50 am

Image

Image

Image

Mostly I stripped and refinished the stock and foreend.... I did a complete tear down and cleaning too...
"Courage is being scared to death... and saddling up anyway."

-John Wayne

User avatar
bgreenea3
Master contributor
Master contributor
Posts: 1587
Joined: Sun Sep 06, 2009 9:35 pm
Location: SW Michigan

H & R. Bay State

Post by bgreenea3 » Wed Feb 26, 2014 9:53 am

Image Image Image Imagedid the wood and re blue the metal.....
"Courage is being scared to death... and saddling up anyway."

-John Wayne

User avatar
bgreenea3
Master contributor
Master contributor
Posts: 1587
Joined: Sun Sep 06, 2009 9:35 pm
Location: SW Michigan

Now for part 3.....

Post by bgreenea3 » Wed Feb 26, 2014 9:57 am

I'm waiting on parts for my third project for my buddy. ....

Image
"Courage is being scared to death... and saddling up anyway."

-John Wayne

greener

Post by greener » Fri Feb 28, 2014 7:42 am

Very nice work.

Medicine Hat
Advanced contributor
Advanced contributor
Posts: 275
Joined: Sun Jul 25, 2010 10:22 pm
Location: West Central MO

Post by Medicine Hat » Fri Feb 28, 2014 4:11 pm

Good Job.
One of my favorite things is to clean up, restore and "old ugly" and make it presentable and useful again.
Several in my safe are such items.
In fact for the most part, I'd rather bring back an old one like that than buy a new one.

Post Reply