GunTalk-Online.com

it will be out side 2700 match with 50 yard slow fire targets. I got interested when at my local in door range they were shooting a 22 bullseye league in winter I have done this two years and some of the guys invited me to shoot at there out door range in the summer wher they have 2700 match so I am...

it is a series 70 mark IV government model I bought new in the mid 70 not sure what year and was shooting with a five man team PPC coarse and was having some trouble so one team member said you need a short trigger and I let him put a short trigger in I don't know if he did and thing else that he di...

I use the foam plugs wit Howard Leight muffs and wear prescription safety glasses, think I will start wearing ball cap when shooting 45acp

shot it to day loaded 1 round in mag and tried it five times, loaded 2 round in mag and tried it five times, loaded 3 round in mag tried it five times it work right every time. here is what I did load mag in gun griped with bought hands with trigger finger out side off guard not on trigger and relea...

I bent the sear spring and it seems to work now. I think maybe I need to have a good gun smith look it over, when I took out the sear and hammer and looked at it with magnification it had spur on sear secondary cut that look like it was not wearing all the way across I honed the spur off and tried a...

I don't have gauge to check weight of pull but was thinking that the trigger was a little lighter than I would like it to be. I might try to do that and see if it will fix the problem.
I may need to get a trigger weight gauge check all my bullseye guns
S&W M41, S&W M14, Colt series 70.

I would not store any thing in foam I bought one of those safes that had foam where the barrel rested and had to go out of town to work so I oiled every thing up good and locked up was gone almost two years when i got back the foam had melted and cemented it's self to barrels on 7 guns what a mess i...

Hi, Bullseye
if I buy a sear spring, mainspring, hammer and sear is there any fitting that would have to be done or would stock parts work by just replacing ?

I will take it apart to night and look for any thing that looks damaged.

thanks

Hi all, need some advice on what to look for and what parts need to be replaced on a colt series 70 mark IV 45acp . history I bought new back in the 70's . had a short trigger put in and changed the sights have shot it maybe 5000 rounds all most all reloads of mine. I had not shot it much in last te...

Thanks for info, I have three springs but do not have any ideal what weight they are so think I will get a 16, 14, and 12 to try. what about shock buffer? gun did not come with one do I need one do not under stand how they work, it look like if you put in front of spring on guide rod it would cause ...

well not sure what caused my problem, I back off over travel screw about
1/4 turn and works good now it was tight and was the first time I have turned
that screw in twenty years. might have had some crud in it I clean it and oil
which I do after every match.

Hi all,
I have a colt series 70 45 have put a ken sight rear on and taller front sight
I have 185 and 200 gr lead cast bullets and will use bullseye powder 3.8 to
4.2 I think. question what spring weight should I be using, and will one work for both weight of bullets?
javascript:emoticon(':?:')

I have increased trigger pull and now some times when trying to get that first round off the trigger will not pull till I let off then pull again, I was wandering
if that increased trigger pull weight would cause over travel to have to be adjusted. or is there something else going on ?

I got the strong box 4 gun but must have got one of the first ones they made it has the scope holder like the 3 gun with just one way to adjust it in upward direction I would have to be 5 or 6 inch taller to use it wish I had waited till they came out with the shown now it has two places and will go...

thanks to all I could build one out of wood but I don't have the tools would be cheaper to buy one I think the aluminum one would be best for me just need to find some extra cash. l thought I wanted a 3 gun but the 4 gun STRONG CASE with the 12 inch wide base would be better I think. may be I can fi...