Taurus 94

Discuss .22 pistols.

Moderators: Bullseye, Moderators

Post Reply
greener

Taurus 94

Post by greener » Sun Apr 17, 2011 9:53 pm

I picked up a 2" Taurus 94 (22lr, 9 shot) revolver a week or so ago. Today was the first time I've managed to take it to the range.
Image

Fit & Feel: Overall it's comfortable to hold. Easy to acquire the sites. and no problems carrying, aiming, shooting.

Finish: No problems that I've found.

Trigger: SA is fairly good. DA is very heavy. Made the trigger on my 442 feel light.

Out of the box it came with the adjustable rear sight all the way down, so my first few rounds were 6" low at 15 yards. I had no problems with adjustment. I had 2-3 failures to fire out of ~90 rounds. All were with Federal value pack.

My last target was all DA at the end of the day. Between my shooting and the heavy trigger, there was a bit of scatter, with a low-left tendency from fighting the trigger. This will probably be the first revolver I try lighter springs on.

Image

User avatar
bgreenea3
Master contributor
Master contributor
Posts: 1587
Joined: Sun Sep 06, 2009 9:35 pm
Location: SW Michigan

Post by bgreenea3 » Mon Apr 18, 2011 12:47 pm

not bad from a snubbie with a 10# trigger
"Courage is being scared to death... and saddling up anyway."

-John Wayne

User avatar
Coach1
Regular contributor
Regular contributor
Posts: 210
Joined: Tue Oct 12, 2010 3:09 pm
Location: Apex North Carolina

Taurus .22

Post by Coach1 » Mon Apr 18, 2011 1:35 pm

Nice shooting...
Are my eyes misreading the picture.. but is that trigger gold finished?
"You can't always get what you want. But if you try sometimes, you just might find, you get what you need." The Rolling Stones

greener

Post by greener » Mon Apr 18, 2011 9:49 pm

The trigger is dull steel. Must be the picture.

greener

Post by greener » Sun May 01, 2011 9:39 pm

Put 100-150 rounds through it this weekend. The DA trigger felt better and I was tighter on groups at 15 yards.

Can't find an 11 lb spring set like they use in the small frame centerfire revolvers, so I ordered a Wolf 9# set. We'll see if that's too light for consistent primer ignition.

greener

Post by greener » Wed May 11, 2011 7:37 pm

Wolf springs arrived. Removed all the firing parts, cleaned them and did a smidge of polishing. Replaced the hammer spring with a 9# spring and the trigger spring with a 6.5# spring. Getting the trigger, hand and transfer bar back in was quite an effort. Very nice DA trigger pull but I may be getting light strikes. Will find out this weekend.

User avatar
Bullseye
Site Admin/Host
Site Admin/Host
Posts: 6384
Joined: Sun Aug 14, 2005 12:23 pm
Location: USA

Post by Bullseye » Wed May 11, 2011 9:18 pm

Unfortunately that sometimes is the result when you install the reduced power springs in a revolver. Hopefully you do not get light strikes.

R,
Bullseye
Image

greener

Post by greener » Wed May 11, 2011 9:57 pm

Thought it might happen, but I figure it's worth the try.

greener

Post by greener » Sun May 15, 2011 11:22 pm

I tried out the 9# spring today. Typically could fire 7 of 9 DA and 8-9 or 9 SA. Great trigger pull for a revolver but too many light strikes. All the rounds that didn't fire could be put back in the revolver and fired. Looks like I try to find the a 10-11# spring or put the original back in.

The 15 yard range was filled so I did my test firing at 25 yards. Put the rounds in about an 8" group. OK for me.

radio
Regular contributor
Regular contributor
Posts: 108
Joined: Tue Mar 09, 2010 4:13 pm

Post by radio » Mon Jul 11, 2011 5:24 pm

greener wrote:I tried out the 9# spring today. Typically could fire 7 of 9 DA and 8-9 or 9 SA. Great trigger pull for a revolver but too many light strikes. All the rounds that didn't fire could be put back in the revolver and fired. Looks like I try to find the a 10-11# spring or put the original back in.

The 15 yard range was filled so I did my test firing at 25 yards. Put the rounds in about an 8" group. OK for me.
Just wondering what, if anything yet, did you do for the spring issue...

Otherwise how are you liking the gun?


I picked up a used, but very good shape 94 at the gun show this past Saturday and couldn't be more pleased thus far. I went in looking specifically for a DA .22 revolver and would have loved to come home with a S&W--and I might some day, but I got the Taurus for exactly HALF of what the best "used" price was for a similar Smith.

It's accurate, fun and the DA isn't bad at all. I've seen muchos grumblings on various gun boards regarding that. My wife wanted something that (at least somewhat) mimics the revolver/DA action of the 642 she has for SD. I will change the wood grips to a similar Hogue-style to help some. Also, I will start my son and daughter out with this little jewel as well. It's gonna make a nice little woods gun for me. I would be way too cheap to carry an expensive S&W 317 through the briars.

greener

Post by greener » Mon Jul 11, 2011 7:15 pm

I think it is a pretty good revolver. A bit heavy on the trigger, but I should be able to overcome that. I've had a bit of a problem with Winchester ammo, but it shoots Federal well.

I have an 8" model 17 that is a "better" revolver than the Taurus. However, I was looking for a snubbie .22 and the Taurus fills the bill at a very reasonable price.

User avatar
HEADKNOCKER
Regular contributor
Regular contributor
Posts: 99
Joined: Sun Jan 03, 2010 8:51 pm
Location: Louisville KY

Post by HEADKNOCKER » Sat Jul 30, 2011 3:14 am

I've been inside a few Taurus Revolvers & for the money they are a fine piece..
Don't try an compare them to a Smith & Wesson as they will always fall a little short of their smoother action..
On the 22 you will more than likely have to use the full power mainspring but can use the lighter weight return spring..
I likes the looks of the little snubbie 22 greener.
Congrats..

greener

Post by greener » Sat Jul 30, 2011 8:31 am

I'm pretty satisfied with the 94. If I could drop a few pounds off the hammer spring, I'd like it better.

Post Reply