GunTalk-Online.com

IT IS DONE. PER BULLSEYE 'S SUGGESTION. I HAD VQ SEND ME A LONGER PRE TRAVEL SCREW(@ NO CHARGE) BECAUSE THE ONE THAT CAME WITH THE TARGET TRIGGER WAS TOO SHORT.
I MADE THE ADJUSTMENT PRE TRAVEL- POST TRAVEL AND I HAVE A VERY NICE TRIGGER PULL WITH LITTLE OR NO CREEP.

NOW ALL I NEED IS LOCTITE 242 WHICH I CANT SEEM TO FIND.

AGAIN THANKS TO BULLSEYE FOR THIS GREAT WEBSITE AND ALL OF ITS CONTRIBUTORS.

#242 is the medium strength blue tread locking sealant and is the most common variety of thread lock sealant. You could also use #248 if that's what is available in your neighborhood Midway USA carries it http://www.midwayusa.com/eproductpage.e ... mid=613078 Try looking in auto parts stores if your local hardware store doesn't carry Locktite Blue.

Hope this helps.

R,
Bullseye

I have used clear fingernail polish in a pinch. It was was Wife's and not mine - Had to say that before the jokes started!

Permatex also makes a blue medium thread lock - Should be available at Lowe's and Home Depot. Here is a link to their product: http://www.neverseezproducts.com/thread ... readlocker

OpsMgr wrote:I have used clear fingernail polish in a pinch. It was was Wife's and not mine - Had to say that before the jokes started!

Permatex also makes a blue medium thread lock - Should be available at Lowe's and Home Depot. Here is a link to their product: http://www.neverseezproducts.com/thread ... readlocker

Now be honest......

JJ

lol, knew you were out there somewhere JJ...