Discuss .22 pistols.
Moderators: Bullseye, Moderators
-
Baldy
- Advanced contributor

- Posts: 340
- Joined: Fri Jul 02, 2010 1:55 am
- Location: Port St.John, Fl.
Post
by Baldy » Mon Jun 27, 2011 10:29 pm
I just put one on my MK-III Target and it caused pitting on the muzzle of the pistol. Does anybody have a idea what's causing this???

The pistol is very accurate right now but I don't know for how long it will last.
Here's a bad picture of it. The clear part is the way it's suppose to be. The shinney part is the pitting

.
Help Please... Another bad picture...

-
blue68f100
- Master contributor

- Posts: 1997
- Joined: Mon May 25, 2009 10:31 pm
- Location: Piney Woods of East Texas
Post
by blue68f100 » Tue Jun 28, 2011 9:09 am
Are you sure it's pitting and not powder residue caked on there? It kind of looks like the powder residue that get trapped between the bolt face and barrel. I was thinking there was suppose to be a O-ring to seal off on the crown. Makes me wonder if unburned powder is collecting and doing so damage.
David
SS MKIII 6 7/8" Fluted Hunter. Mueller Quick Shot, Bushnell 2x Scope, Hogue Rubber Grips
Custom Built 1911
-
Bullseye
- Site Admin/Host

- Posts: 6384
- Joined: Sun Aug 14, 2005 12:23 pm
- Location: USA
Post
by Bullseye » Tue Jun 28, 2011 4:57 pm
That looks more like lead spatter than pitting. It could easily be confused for pitting by the typical appearance of the residue.
R,
Bullseye
-
Baldy
- Advanced contributor

- Posts: 340
- Joined: Fri Jul 02, 2010 1:55 am
- Location: Port St.John, Fl.
Post
by Baldy » Tue Jun 28, 2011 10:58 pm
I let it soak in some Blue Wonder and sure enought it's coming off. You both were right as it is lead. It sure looked like it was pitting into the barrel but that was just where it was built up.
About all I can say for the muzzle break is it sure does look good, but it does nothing for your pistol.
Thanks Gents..
-
Bullseye
- Site Admin/Host

- Posts: 6384
- Joined: Sun Aug 14, 2005 12:23 pm
- Location: USA
Post
by Bullseye » Wed Jun 29, 2011 8:52 am
It only looks good for a little while as long as you don't shoot the pistol with it attached. It does't take too long for lead residue to build up externally an internally on the compensator.
R,
Bullseye
-
ruger22
- Master contributor

- Posts: 1574
- Joined: Mon Apr 13, 2009 10:35 pm
- Location: Virginia
Post
by ruger22 » Wed Jun 29, 2011 12:34 pm
I'm glad Baldy's pistol will be as purty as ever. I had considered a compensator, and dismissed it as little benefit and extra cleaning. Never thought it could cause this much cleaning.
* 2 Ruger Bearcat stainless, w/ EWK ejector housings & Wolff springs
* Ruger SP-101 .22LR, w/ Wolff springs
* 2 NAA Guardian .32ACP
* 3 Zastava M70 .32ACP
* S&W 15-22 Sport (.22LR AR)
* 2 Ruger SR22 .22LR pistols
-
Baldy
- Advanced contributor

- Posts: 340
- Joined: Fri Jul 02, 2010 1:55 am
- Location: Port St.John, Fl.
Post
by Baldy » Wed Jun 29, 2011 4:08 pm
Never having one before I figured I might be missing a trick in this speed shooting that I use this Ruger for. I don't mind cleaning a gun but this took some real elbow grease. It's just not worth the time for a cosmetic piece that doesn't help your performance.. Lesson learned the hard way...
