Page 1 of 1
MK 1 Issues
Posted: Thu Nov 29, 2012 6:22 pm
by chefmossy
MK 1 will fire first two rounds then nothing manually work the action and it will fire next round.
Posted: Thu Nov 29, 2012 6:47 pm
by greener
Not loading round 3 or not firing it?
Posted: Thu Nov 29, 2012 6:48 pm
by blue68f100
If you have not detail clean the gun start there.
These are the most common problems:
I'm assuming it's loading a round but the trigger is not resetting. The reset can be caused from a couple of things. The disconnector can be sticking. This is controlled by the spring under the trigger plunger. Or it's actually dirty and sticking to the side of the frame. If you have a trigger that has adj screws, the post travel may have moved, back off 1/2 turn.
Posted: Thu Nov 29, 2012 9:32 pm
by chefmossy
it loads the third round but will not fire it. I will try cleaning it and see if that helps
Posted: Thu Nov 29, 2012 10:09 pm
by greener
Thoroughly clean the bolt also. I've gotten failures to fire when the bolt face is crudded up.