Make-shift bipod UPDATED!! For all Barrels.

The place to discuss firearms related modifications or home made shooting equipment.

Moderators: Bullseye, Moderators

User avatar
Jack D
Expert contributor
Expert contributor
Posts: 429
Joined: Tue Apr 28, 2009 1:00 pm
Location: Elmira, Oregon

Post by Jack D » Thu Jun 11, 2009 3:46 pm

Georgezilla wrote:Nice set up. Does the clamp stay in place well while live firing?

After I had been shooting for about year I mostly cut out the caffeine. My hold improved considerably. 24 hours before I go shooting, I wont even eat chocolate. I have 1 cup of something with caffeine about every 2 weeks, and never with a meal as caffeine can be stored in fat cells.
Yes it does stay in place...at least on my 22/45. Can't say what it would do on something bigger, but I suspect it would do OK since the strap wraps the barrel and those spring clamps are strong (at least good ones are).

I suspect my hold would improve dramatically also if I cut caffeine. My health might, too. Maybe I should think about it. I don't shoot competition....just shoot for pleasure. I don't even know how to score a target or what a good score might be under any given conditions. I'd be shootiing tin cans if it were possible in my shop. Paper is my only choice. I do post pictures of varmints on the trap and pretend I'm actually hunting. Bin Laden is missing an eye. :lol: The nearest range is 35-40 miles away, except my shop range. It's only 150' away.
Jack
Ruger SP101, 3", .357, CT laser
Ruger SR22P, CT laser
Ruger LCR22, CT laser
Ruger 10/22 Deluxe, scoped
H&R Handi, .357 customized, laser, red dot, scope, weapon light, bipod
Benjamin-Sheridan, 5mm (.20), scoped.

smokey
Regular contributor
Regular contributor
Posts: 142
Joined: Thu Feb 26, 2009 7:02 am
Location: Eastern NC

Post by smokey » Thu Jun 11, 2009 5:21 pm

Great idea!! I will have to give it a try.

User avatar
lilblkgun
New member
New member
Posts: 2
Joined: Fri Jun 12, 2009 1:35 am
Location: VIRGINIA

Post by lilblkgun » Fri Jun 12, 2009 10:23 am

THAT'S A GREAT IDEA!!
OneBigAssMistakeAmerica

User avatar
Hardball
Regular contributor
Regular contributor
Posts: 146
Joined: Fri Sep 16, 2005 2:37 am
Location: Oregon

Post by Hardball » Tue Jun 23, 2009 4:48 am

Oh, Jack, I guess I am going to have to teach you to armrest that Ruger.
http://img.photobucket.com/albums/v24/t ... -Jan08.jpg
25 yards, armrested, weak hand adding support, wrists forward were not supported. Had an Ultradot 4 dot on at the time. Five shots only. I did quit while I was ahead :)
Jack

User avatar
Bullseye
Site Admin/Host
Site Admin/Host
Posts: 6377
Joined: Sun Aug 14, 2005 12:23 pm
Location: USA

Post by Bullseye » Tue Jun 23, 2009 10:03 am

Hardball, do I see that right? Did you have your Mark II's receiver milled to accept the Bo-Mar sight base? Looks like the rear of the base, underneath blade, has a flat milled into the receiver tube for the sight.

R,
Bullseye
Image

User avatar
Hardball
Regular contributor
Regular contributor
Posts: 146
Joined: Fri Sep 16, 2005 2:37 am
Location: Oregon

Post by Hardball » Tue Jun 23, 2009 10:56 am

Correct you are Mr Bullseye. The BoMar instructions called for a little flat there, I reshaped the top of the big pin as well. No big deal at all. However this step is not required with the Volquartsen sight. But the Volq. sight is a bit forward shortening the sight radius. I went Volq on two other sight switches, both have the 6 something inch barrels. If I were to do another BoMar, I would install before any milling. Then assemble and lower the sight leaf toward where it needs to be and carefully remove underneath only what it needed for a lowest mechanical zero. On this blue 5.5" gun, I am able to lower the sight all the way to the deck. From there I lowered the front blade to match. This gun has done wonders offhand. Like one session of 25 for 25 shots in the ten ring at 50' TF. The Roddy trigger job is half the secret. The other two guns are iron use only.

User avatar
Bullseye
Site Admin/Host
Site Admin/Host
Posts: 6377
Joined: Sun Aug 14, 2005 12:23 pm
Location: USA

Post by Bullseye » Tue Jun 23, 2009 6:31 pm

You're getting all you can out of that one. Some folks just cannot believe that Ruger's can give that level of groupings but you and I know better.

R,
Bullseye
Image

User avatar
Jack D
Expert contributor
Expert contributor
Posts: 429
Joined: Tue Apr 28, 2009 1:00 pm
Location: Elmira, Oregon

Post by Jack D » Tue Jun 23, 2009 8:52 pm

Hardball wrote:Oh, Jack, I guess I am going to have to teach you to armrest that Ruger.
http://img.photobucket.com/albums/v24/t ... -Jan08.jpg
25 yards, armrested, weak hand adding support, wrists forward were not supported. Had an Ultradot 4 dot on at the time. Five shots only. I did quit while I was ahead :)
Jack
OK, Jack. But that sounds dangerous. I'd probably shoot off my elbow. Post a picture of your stance????? The only stance I know is grip firmly with both hands, close eyes and fire. So far, no holes in the shop walls.
Jack
Ruger SP101, 3", .357, CT laser
Ruger SR22P, CT laser
Ruger LCR22, CT laser
Ruger 10/22 Deluxe, scoped
H&R Handi, .357 customized, laser, red dot, scope, weapon light, bipod
Benjamin-Sheridan, 5mm (.20), scoped.

User avatar
Hardball
Regular contributor
Regular contributor
Posts: 146
Joined: Fri Sep 16, 2005 2:37 am
Location: Oregon

Re:

Post by Hardball » Wed Mar 01, 2023 7:12 am

Jack D wrote:
Tue Jun 23, 2009 8:52 pm
Hardball wrote:Oh, Jack, I guess I am going to have to teach you to armrest that Ruger.
http://img.photobucket.com/albums/v24/t ... -Jan08.jpg
25 yards, armrested, weak hand adding support, wrists forward were not supported. Had an Ultradot 4 dot on at the time. Five shots only. I did quit while I was ahead :)
Jack
OK, Jack. But that sounds dangerous. I'd probably shoot off my elbow. Post a picture of your stance????? The only stance I know is grip firmly with both hands, close eyes and fire. So far, no holes in the shop walls.
Looking for the "Tractor" thread, I found a few old posts that brought back memory of good times.
Didn't find the tractor thread though.

User avatar
Hardball
Regular contributor
Regular contributor
Posts: 146
Joined: Fri Sep 16, 2005 2:37 am
Location: Oregon

Re:

Post by Hardball » Wed Mar 01, 2023 7:16 am

Hardball wrote:
Tue Jun 23, 2009 4:48 am
Oh, Jack, I guess I am going to have to teach you to armrest that Ruger.
http://img.photobucket.com/albums/v24/t ... -Jan08.jpg
25 yards, armrested, weak hand adding support, wrists forward were not supported. Had an Ultradot 4 dot on at the time. Five shots only. I did quit while I was ahead :)
Jack
Image

User avatar
Hardball
Regular contributor
Regular contributor
Posts: 146
Joined: Fri Sep 16, 2005 2:37 am
Location: Oregon

Re:

Post by Hardball » Wed Mar 01, 2023 7:19 am

Hardball wrote:
Tue Jun 23, 2009 10:56 am
Correct you are Mr Bullseye. The BoMar instructions called for a little flat there, I reshaped the top of the big pin as well. No big deal at all. However this step is not required with the Volquartsen sight. But the Volq. sight is a bit forward shortening the sight radius. I went Volq on two other sight switches, both have the 6 something inch barrels. If I were to do another BoMar, I would install before any milling. Then assemble and lower the sight leaf toward where it needs to be and carefully remove underneath only what it needed for a lowest mechanical zero. On this blue 5.5" gun, I am able to lower the sight all the way to the deck. From there I lowered the front blade to match. This gun has done wonders offhand. Like one session of 25 for 25 shots in the ten ring at 50' TF. The Roddy trigger job is half the secret. The other two guns are iron use only.
50' Slowfire on left. Sustained on right with the MkII mentioned
Image

User avatar
Bullseye
Site Admin/Host
Site Admin/Host
Posts: 6377
Joined: Sun Aug 14, 2005 12:23 pm
Location: USA

Re: Make-shift bipod UPDATED!! For all Barrels.

Post by Bullseye » Sun Mar 19, 2023 7:46 pm

Looks real good. I see you've been staying on top of your game.

I have been spending a bit more time with my service rifle shooting across the course and less with my pistols. Trying to refine all my positions now that we can use scopes for competition. I know I'm a bit late with those rules changes but I'm a bit of a traditionalist with my service rifles and stuck with the iron sights and A2 style fixed rifle stocks for as long as I could. As I acquired more birthdays, it was getting harder to get a clear sight picture on those narrow front posts.

R,
Bullseye
Image

Post Reply