Parts Source: screws, (firing)pins, springs...

The place to discuss firearms related modifications or home made shooting equipment.

Moderators: Bullseye, Moderators

Post Reply
User avatar
toyfj40
Master contributor
Master contributor
Posts: 672
Joined: Wed Aug 17, 2005 11:32 am
Location: 76101

Parts Source: screws, (firing)pins, springs...

Post by toyfj40 » Sat Mar 17, 2007 2:55 pm

I presume we all know about Numrich/e-GunParts.com and Brownells.com
and (for popular stuff) MidWayUSA.com (and other) as sources for the
little things that get lost or buggered-up or worn on our various firearms.

well... here's a "plug" for a little outfit which I have no vested interest...

I needed a Main-spring+rod for a Marlin-60... and a buck-horn for another
and a set of filler-screws for another... then a screw for a SW revolver...
I mentioned this at the range... and two guys spent a while trying to
remember where a GunParts-place was... they finally remembered
enough for me to locate it... right here in the DFW metroplex.
(about a 15mi drive for me)... Lee's GunParts

His "shop" is (no insult intended) a junk-shop... but he has an accumulation
of parted-out firearms that covers just about all the screws/ springs/ grips/
butt-plates/ and things you may need to correct that nagging part on
some of your firearms...

The guys work most of the area GunShows on Weekends, so note the
"store hours" are Tue/Wed/Thur... they do not put their Ph# on the
webpage (presumably to avoid junk-calls)... so, I'll be creative:
try this AreaCode is 970 plus two, then exchange 790 with
the number 0770 plus three.

I've already placed another missing "screw" on my need-list,
so I'll be headed back when my list warrants a visit...
Good luck. if you have a local/area parts/smith/etc source
let us know.

Post Reply