I just got into reloading and put together my first 50 rd box of ammo, 38sp. The problem is this: While using the hand primer (RCBS) I noticed the primers were not seating all the way down into the pocket of the brass. So I called a friend whose reloads with the same hand priming tool(RCBS), and he said he noticed the same problem when he started doing pistol rounds. He said it was ok with rifle shells, but when he started priming pistol, his primers would not seat far enough either. I then talked with a reloading instructor and he said the same thing, the hand primer (I think he uses RCBS) didn't do the job for him either. We both had to seat the primer adequately with the press. This is 3 for 3 hand primers that don't work well. I called RCBS and they said they would send out a new primer to me. I accepted, but don't have much confidence in it working well enough. If the new one doesn't work, I'm going to ask for my money back, but this is going to be tough since the primer came as part of a Reloading Kit. I can raise the dickens with RCBS though. Has anybody else had similar problems with HandPimers ?
thanks, hakaman
Hand Primer
Moderators: Bullseye, Moderators
HAK, I've used the Lee hand primer for years and it has never failed. You can feel the primer seating. It will be one of you best acquisitions. Also check out the LEE taper crimp as it is the easiest best to use to get the proper crimp. Regards
Member Marine Corps League
Life Member National Rifle Association
Life Member Texas State Rifle Association
Life Member National Rifle Association
Life Member Texas State Rifle Association
-
- Advanced contributor
- Posts: 333
- Joined: Sat Jul 19, 2008 8:03 pm
- Location: Downeast Maine
- Contact:
- bearandoldman
- Ye Loquacious Olde Pharte
- Posts: 4194
- Joined: Tue Aug 16, 2005 10:30 am
- Location: Mid Michigan