Page 1 of 1
Poor boy's trigger job
Posted: Sun Aug 05, 2007 10:44 am
by gcp
Is anyone of you familiar with this mod? And if so is it reliable? I did it to my new Ruger and it does make the trigger action lighter....
http://www.gunblast.com/Poorboy.htm
Re: Poor boy's trigger job
Posted: Sun Aug 05, 2007 2:00 pm
by John fox
gcp wrote:Is anyone of you familiar with this mod? And if so s it reliable? I did it to my new Ruger and it does make the trigger action lighter....
http://www.gunblast.com/Poorboy.htm
Did it to my Ruger Bisley 44 and it works well.
Posted: Sun Aug 05, 2007 6:09 pm
by gcp
Trigger pull weight data on my 3 Rugers:
Mark II after trigger job = 1lb 5 oz
22 SA with modification = 2lbs 6.7 oz (stock trigger spring)
44 mag SA with modification = 2lbs 10.9 oz (stock trigger spring)
45 SA without modification = 3lbs 3.2oz, with mode = 1lb 6.1oz (wolf trigger spring)
Posted: Sun Aug 05, 2007 6:46 pm
by jjfunk
I've been using my Superblackhawk like this for years. Never had any reliability issues. Just make sure when drawing the hammer back that it seats on the sear, or you might have an AD due to the sear not having as much pressure seating it to the hammer.
Posted: Sun Aug 05, 2007 9:47 pm
by gcp
Thanks jjfunk!