The place to discuss the inner workings of firearms.
Moderators: Bullseye, Moderators
-
Bullseye
- Site Admin/Host
![Site Admin/Host Site Admin/Host](./images/ranks/admn.gif)
- Posts: 6382
- Joined: Sun Aug 14, 2005 12:23 pm
- Location: USA
Post
by Bullseye » Wed Aug 02, 2006 10:32 pm
Here is a link to the 22/45 pages for maintenance.
http://www.guntalk-online.com/2245detailstripping.htm
These are also available from the regular detailed stripping pages via imbedded links within the stripping and reassembly procedures.
Hope this helps.
R,
Bullseye
-
Waffen
- New member
![New member New member](./images/ranks/new.gif)
- Posts: 21
- Joined: Thu Jul 27, 2006 6:40 pm
Post
by Waffen » Wed Aug 02, 2006 10:48 pm
I cannot express how greatful I am for this. THANKS A TON!
-
Bullseye
- Site Admin/Host
![Site Admin/Host Site Admin/Host](./images/ranks/admn.gif)
- Posts: 6382
- Joined: Sun Aug 14, 2005 12:23 pm
- Location: USA
Post
by Bullseye » Wed Aug 02, 2006 10:55 pm
Waffen wrote:I cannot express how greatful I am for this. THANKS A TON!
It's what I do. If you think of anything else you'd like to see on that page for the 22/45, don't be shy to ask and I'll see what I can do.
R,
Bullseye
-
Bullseye
- Site Admin/Host
![Site Admin/Host Site Admin/Host](./images/ranks/admn.gif)
- Posts: 6382
- Joined: Sun Aug 14, 2005 12:23 pm
- Location: USA
Post
by Bullseye » Thu Aug 03, 2006 10:50 pm
If anyone is contemplating changing out their OEM Ruger sear for a VQ Target sear, make sure you have the right sear spring for your pistol.
The VQ part comes with a Mark II sear spring and if you have a 22/45 you must reinstall the original into your pistol.
Hope this helps.
R,
Bullseye