The place to discuss the inner workings of firearms.
Moderators: Bullseye, Moderators
-
Mr. Nail
- Regular contributor
- Posts: 149
- Joined: Sun Mar 21, 2010 3:44 pm
- Location: Meigs,Ga
Post
by Mr. Nail » Wed Jul 14, 2010 7:50 am
I get what SA, DA/SA, and DOA means but what does striker fired action mean? I read it on some of the new models on S&W autoloaders.
-
Bullseye
- Site Admin/Host
- Posts: 6382
- Joined: Sun Aug 14, 2005 12:23 pm
- Location: USA
Post
by Bullseye » Wed Jul 14, 2010 8:53 am
A striker is a highly tensioned firing pin. This pin is released by the trigger and the spring tension drives it into the cartridge for detonation. This style of handgun action uses no hammer to drive the firing pin only spring tension. Basically the mainspring is located on the firing pin. It is basically operating like a bolt action rifle. The striker can be cocked by the trigger action, the slide, or a combination of both like how Glock pistols operate.
R,
Bullseye
Last edited by
Bullseye on Wed Jul 14, 2010 3:47 pm, edited 1 time in total.
-
Mr. Nail
- Regular contributor
- Posts: 149
- Joined: Sun Mar 21, 2010 3:44 pm
- Location: Meigs,Ga
Post
by Mr. Nail » Wed Jul 14, 2010 2:57 pm
O.K. gotcha Bullseye. Is the trigger pull on these pistols as light as most single action guns. And also do they hold up well?
-
Bullseye
- Site Admin/Host
- Posts: 6382
- Joined: Sun Aug 14, 2005 12:23 pm
- Location: USA
Post
by Bullseye » Wed Jul 14, 2010 3:50 pm
Striker springs can wear out. It depends on the pistol and the system. I like to release the tension when not in use or for long term storage. Replacement springs are not hard to get and relatively easy to install.
R,
Bullseye
-
Mr. Nail
- Regular contributor
- Posts: 149
- Joined: Sun Mar 21, 2010 3:44 pm
- Location: Meigs,Ga
Post
by Mr. Nail » Fri Jul 16, 2010 7:52 am
thanks alot for the knowledge