MKII Hammer Bushing Question
Posted: Tue Nov 05, 2013 6:57 am
Three of my MKIIs have about 1/16" or so of forward trigger movement before the small click and the sear/hammer is reset.
The 4th MKII resets when the trigger is almost fully forward.
They all have Volq sears and triggers, and the pre-travel adjustment is on the edge of not firing if I would adjust it more.
All other parts in all the guns are stock.
All the guns have great triggers with no malfunctions.
Would the Clark bushing change the geometry for a shorter reset? Or another disconnector?
Thanks in advance.
The 4th MKII resets when the trigger is almost fully forward.
They all have Volq sears and triggers, and the pre-travel adjustment is on the edge of not firing if I would adjust it more.
All other parts in all the guns are stock.
All the guns have great triggers with no malfunctions.
Would the Clark bushing change the geometry for a shorter reset? Or another disconnector?
Thanks in advance.